Cisco Router

CISCO ROUTER

To configure Cisco Router to send syslog messages

Enter the command:

enable

To enter privileged EXEC mode.

Enter the command:

configure terminal

This will allow you to enter global configuration mode.

Enter the command:

logging host

Replace host with Log Collector IP Address.

Enter the command:

logging trap level

Specify the level as per requirement.

Where:

Emergency: 0

Alert: 1

Critical: 2

Error: 3

Warning: 4

Notice: 5

Informational: 6

Debug: 7

Enter the command:

logging facility local7

Default facility-type value is local7.

Enter the command:

end

To save changes and exit global configuration mode.

To display changes made enter command:

show logging

This displays logging configuration. Verify configuration.

nd Severity from the listbox.

Near the top-left of the page, click Policy Information.

Click Commit Changes.