# Aruba switch log integration

**Aruba Switch Log Integration Guide**

**Log Integration procedure:**

To forward logs, make the following configuration.

1. **Login to the CLI Terminal**
2. **Switch to Global Configuration mode.**

Enter the following command:

**config t**

`device# config t`

3. **Configure Syslog Forwarding**

Enter the following command:

**logging X.X.X.X udp 12311**

`device(config)# logging 10.10.2.73 udp 12311`

Replace X.X.X.X with Log Collector IP of specific branch with the Port Number same as above.

4. **Configure Severity level**

Enter the following command:

**logging severity debug**

`device(config)# logging severity debug`

5. **Exit the Configuration mode.**

Type **end**

`device(config)# end`

6. **Save the configuration.**

Type **write memory**

`device# write memory`


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.blusapphire.io/log-forwarding/03_log-forwarding-guide/log-forward/aruba/aruba-switch-log-integration.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.