> For the complete documentation index, see [llms.txt](https://docs.blusapphire.io/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.blusapphire.io/log-forwarding/03_log-forwarding-guide/log-forward/blue-coat-proxy-logs/to-forward-blue-coat-proxy-logs-using-cli.md).

# To Forward Blue Coat Proxy Logs Using CLI

### TO FORWARD BLUE COAT PROXY LOGS USING CLI 

1. At the root configure mode, Enter the command 

`syslog view` 

To view the default configuration. 

1. To change the facility, enter the command 

`syslog facility <facility>`&#x20;

1. where facility is the category which should be sent to Log Collector.&#x20;
2. To start logging to the specified facility, enter the command&#x20;

`syslog add <Log Collector IP Address>`&#x20;

1. To verify that the host and facility are correct, enter the command&#x20;

`syslog view`&#x20;

1. Confirm the changes.&#x20;