> For the complete documentation index, see [llms.txt](https://docs.blusapphire.io/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.blusapphire.io/log-forwarding/03_log-forwarding-guide/log-forward/broadcom/brocade-and-ruckus-switch-log-integration.md).

# Brocade & Ruckus Switch Log Integration

**Brocade/Ruckus**

**L2 & L3 Switch**

**Log Integration Guide**

**Log Integration procedure:**

To forward logs, make the following configuration.

1. **Login to the CLI Terminal**
2. **Switch to Global Configuration mode.**

Enter the following command:

**config t**

`device# config t`

1. **Configure Syslog Forwarding**

Enter the following command:

**logging host X.X.X.X udp-port 12520**

`device(config)# logging host 10.20.100.161 udp-port 12520`

Replace X.X.X.X with Log Collector IP of specific branch with the Port Number same as above.

1. **Exit the Configuration mode.**

Type Exit