# Cavera L2 Switch

**Cavera L2 Switch**

**Log Integration Guide**

**Log Integration procedure:**

To forward logs, make the following configuration.

1. **Login to the CLI Terminal**
2. **Switch to Global Configuration mode.**

Enter the following command:

**config t**

`device# config t`

1. **Configure Syslog Forwarding**

Enter the following command:

**logging server X.X.X.X**

`device(config)# logging server 10.20.100.161`

Replace X.X.X.X with Log Collector IP of specific branch same as above.

Logging level will be automatically set by the above command.

1. **Exit the Configuration mode.**

Type Exit

`device(config)# exit`

1. **Save the configuration.**

Type write memory

`device# write memory`


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.blusapphire.io/log-forwarding/03_log-forwarding-guide/log-forward/cavera-l2-switch.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.