# Cisco L2 Switch Log Integration

**Log Integration Guide**

**Log Integration procedure:**

To forward logs, make the following configuration.

1. **Login to the CLI Terminal**
2. **Switch to Global Configuration mode.**

Enter the following command:

**config t**

`device# config t`

1. **Configure Syslog Forwarding**

Enter the following command:

**logging host X.X.X.X port 12515 severity debugging**

`device(config)# logging host 10.20.100.161 port 12515 severity debugging`

Replace X.X.X.X with Log Collector IP of specific branch with the Port Number same as above.

1. **Exit the Configuration mode.**

Type Exit

`device(config)# exit`

1. **Save the configuration**

Type write memory


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.blusapphire.io/log-forwarding/03_log-forwarding-guide/log-forward/cisco/cisco-l2-switch-log-integration.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.