> For the complete documentation index, see [llms.txt](https://docs.blusapphire.io/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.blusapphire.io/log-forwarding/03_log-forwarding-guide/log-forward/cisco/hci_cisco_hx-240c_m5sx_cims-intersight.md).
# HCI\_CISCO\_HX 240C\_M5SX\_CIMS(Intersight)
**HCI CISCO HX 240C M5SX CIMS (Intersight) :**
1. Log in to Cisco Intersight with your Cisco ID and select admin role.
2. From the **Service Selector** drop-down list, select **Infrastructure Service**.
3. Navigate to **Configure** > **Policies**, and then click **Create Policy**.
4. Under Platform Type, Select the Platform as per the existing one.
5. Select **Syslog**, and then click **Start**.
6. On the **General** page, configure the following parameters:
| | |
| -------------------------- | ----------------------------------------------------------------------- |
| **Property** | **Essential Information** |
| **Organization** | Select the Organization. |
| **Name** | Enter a name for your policy. |
| **Description (Optional)** | Provide a short description |
| **Add Tag (Optional)** | Enter a tag in the key:value format. For example, Org: IT or Site: APJ. |
7. On the **Policy Details** page, configure the following parameter
| | | |
| -------------------------------------------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------- | - |
| **Property** | **Essential Information** | |
| **Local Logging** | | |
| **Minimum Severity to Report** | Select the lowest severity level to report in the remote log. The severity levels are: | |
| 0 Emergency | | |
| 1 Alert | | |
| 2 Critical | | |
| 3 Error | | |
| 4 Warning | | |
| 5 Notice | | |
| 6 Informational | | |
| 7 Debug | | |
| **Remote Logging - Syslog Server 1 and Syslog Server 2** | | |
| **Enable** | Select this option to enable or disable the Syslog policy. | |
| **Hostname/IP Address** | Enter the hostname or IP address of the Syslog server to store the Cisco IMC log. You can set an IPv4 or IPv6 address or a domain name as the remote system address. | |
| **Note** | If you have both IPv4 and IPv6 as the remote logging addresses, ensure to configure IPv4 and IPv6 in the Fabric Interconnect through the command-line interface (CLI). | |
| | | |
| **Minimum Severity To Report** | Select the lowest severity level to report in the remote log. The severity levels are: | |
| 0 Emergency | | |
| 1 Alert | | |
| 2 Critical | | |
| 3 Error | | |
| 4 Warning | | |
| 5 Notice | | |
| 6 Informational | | |
| 7 Debug | | |
8. Click **Create**.