> For the complete documentation index, see [llms.txt](https://docs.blusapphire.io/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.blusapphire.io/log-forwarding/03_log-forwarding-guide/log-forward/juniper/configuring-to-send-syslog-messages-directly-from-sensor.md).

# Configuring to send Syslog Messages directly from Sensor

### Configuring to send Syslog Messages directly from Sensor 

1. Log in to the Juniper Networks IDP device. 
2. Click Device > Report Settings > Enable Syslog in the Juniper Networks IDP device. 
3. Select the Enable Syslog Messages check box. 
4. Click Apply to save the changes. 

This configuration will generate syslogs for: 

* All attacks 
* Policy load 
* Restart 

This configuration will not provide: 

* Profiler logs 
* Device connect/disconnect logs 
* Interface UP/DOWN logs 
* Logs for Bypass State Changes  


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.blusapphire.io/log-forwarding/03_log-forwarding-guide/log-forward/juniper/configuring-to-send-syslog-messages-directly-from-sensor.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.