> For the complete documentation index, see [llms.txt](https://docs.blusapphire.io/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.blusapphire.io/log-forwarding/03_log-forwarding-guide/log-forward/juniper/juniper-idp.md).

# Juniper IDP

### Configuring to send Syslog Messages directly from Sensor 

1. Log in to the Juniper Networks IDP device. 
2. Click Device > Report Settings > Enable Syslog in the Juniper Networks IDP device. 
3. Select the Enable Syslog Messages check box. 
4. Click Apply to save the changes. 

This configuration will generate syslogs for: 

* All attacks 
* Policy load 
* Restart 

This configuration will not provide: 

* Profiler logs 
* Device connect/disconnect logs 
* Interface UP/DOWN logs 
* Logs for Bypass State Changes