> For the complete documentation index, see [llms.txt](https://docs.blusapphire.io/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.blusapphire.io/log-forwarding/03_log-forwarding-guide/log-forward/lenovo/lenovo-l2-switch-log-integration.md).

# Lenovo L2 Switch Log Integration

**Log Integration Guide**

**Log Integration procedure:**

To forward logs, make the following configuration.

1. **Login to the CLI Terminal**
2. **Switch to Global Configuration mode.**

Enter the following command:

config t

`device# config t`

1. **Configure Syslog Forwarding**

Enter the following command:

**logging server X.X.X.X protocol udp port 12421**

`device(config)# logging server 10.20.100.161 protocol udp port 12421`

Replace X.X.X.X with Log Collector IP of specific branch with the Port Number same as above.

1. **Set the Logging Level**

Enter the following command:

**logging level all 7**

`device(config)# logging level all 7`

1. **Exit the Configuration mode.**

Type **end**

`device(config)# end`

1. **Save the configuration**

Type **write memory**