# Aruba-6200F-48-Access Switch

Access Switch

6200F-48 switch:

To configure the IP address of a syslog server to which the Aruba 6200F-48 switch can direct the logs, you can follow these steps:

* Connect to the switch using a console cable or a Telnet/SSH session.
* Enter the privileged EXEC mode by typing \`enable\` and providing the password if prompted.
* Enter the global configuration mode by typing \`configure terminal\`.
* Enter the logging configuration mode by typing \`logging\`.
* Specify the IP address of the syslog server by typing \`host \<ip-address>\`. You can also specify the UDP port number and the facility level by adding \`port \<port-number>\` and \`facility \<facility-level>\` respectively. For example, \`host 192.168.1.100 port 514 facility local7\`.
* Exit the logging configuration mode by typing \`exit\`.
* Save the configuration by typing \`write memory\`.

You can verify the syslog configuration by typing show logging in the privileged EXEC mode. You can also view the syslog messages on the switch by typing show logging bu