# lenovo\_think\_system\_manager\_851

**Lenovo (think system manager 8.51)**

\
Configuring a Syslog

\
Log in to ThinkSystem system manager.

![loginto](https://2078222076-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-MMRHZBPHlLDUc8519fX%2Fuploads%2Fz4z1TTywSZ3RNS5MIaeI%2F07be4b68%20da4a%204ca8%208732%202368e9954b19.png?alt=media)

1. Select **Settings**.

![Settings](https://2078222076-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-MMRHZBPHlLDUc8519fX%2Fuploads%2F04lZPQ3jqfDXIrVWwPby%2F3191c18e%204f68%204f2b%20a81f%208bcfb1bc4715.png?alt=media)

1. Select **Access Management**.

![AccessManagement](https://2078222076-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-MMRHZBPHlLDUc8519fX%2Fuploads%2Ftb7Z5lIpuIlIEgJ9mPgh%2F169a000b%20e996%204588%20a341%20e4df60b1ebca.png?alt=media)

1. From the Audit Log tab, select **Configure Syslog Servers**.

![ConfigureSyslogServers](https://2078222076-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-MMRHZBPHlLDUc8519fX%2Fuploads%2Fg6aKkYoqDj7YHda7CjAD%2Fb68007a3%201341%2043df%2081e4%20a595e30eed9c.png?alt=media)

1. The Configure Syslog Servers dialog box opens. Click **Add**.

![Add](https://2078222076-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-MMRHZBPHlLDUc8519fX%2Fuploads%2FzcC4PamqMdoMdNaty4fa%2F3d316460%2003af%204e04%208090%208a7694ee52ea.png?alt=media)

1. The Add Syslog Server dialog box opens. Enter information for the server, and then click **Add**.

![add syslog server](https://2078222076-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-MMRHZBPHlLDUc8519fX%2Fuploads%2F93LuleuRyLhAOV0Py5QR%2Fcff62eb4%203286%204f71%2088f9%20f9d18e35e923.png?alt=media)

1. After you click Add, the Configure Syslog Servers dialog box opens and displays your configured syslog server on the page.

![added](https://2078222076-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-MMRHZBPHlLDUc8519fX%2Fuploads%2FXxAHANar6mCESIE5DY5x%2F16002f22%206522%2041a8%20856a%20031962133d4b.png?alt=media)

* Server address – Enter a fully qualified domain name, an IPv4 address, or an IPv6 address.
* Protocol – Select a protocol from the drop-down list (for example, TLS, UDP, or TCP).
* Upload certificate (optional) – If you selected the TLS protocol and have not yet uploaded a signed CA certificate, click **Browse** to upload a certificate file. Audit logs are not archived to a syslog server without a trusted certificate.

**Note:** If the certificate becomes invalid later, the TLS handshake will fail. As a result, an error message is posted to the audit log and messages are no longer sent to the syslog server. To resolve this issue, you must fix the certificate on the syslog server and then go to **Settings** > **Audit Log** > **Configure Syslog Servers** > **Test All** .

* Port – Enter the port number for the syslog receiver.

1. To test the server connection with the storage array, select **Test All**.

![test all](https://2078222076-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-MMRHZBPHlLDUc8519fX%2Fuploads%2FuECOzNZ6Cg3IlX1kuV4I%2F2e45bd3a%20a042%20469d%20a732%205f8c5e642e74.png?alt=media)