Brocade & Ruckus Switch Log Integration

Brocade/Ruckus

L2 & L3 Switch

Log Integration Guide

Log Integration procedure:

To forward logs, make the following configuration.

1. Login to the CLI Terminal

2. Switch to Global Configuration mode.

Enter the following command:

config t

device# config t

1. Configure Syslog Forwarding

Enter the following command:

logging host X.X.X.X udp-port 12520

device(config)# logging host 10.20.100.161 udp-port 12520

Replace X.X.X.X with Log Collector IP of specific branch with the Port Number same as above.

1. Exit the Configuration mode.

Type Exit