Cisco L2 Switch Log Integration

Log Integration Guide

Log Integration procedure:

To forward logs, make the following configuration.

1. Login to the CLI Terminal

2. Switch to Global Configuration mode.

Enter the following command:

config t

device# config t

1. Configure Syslog Forwarding

Enter the following command:

logging host X.X.X.X port 12515 severity debugging

device(config)# logging host 10.20.100.161 port 12515 severity debugging

Replace X.X.X.X with Log Collector IP of specific branch with the Port Number same as above.

1. Exit the Configuration mode.

Type Exit

device(config)# exit

1. Save the configuration

Type write memory