Aruba switch log integration

Aruba Switch Log Integration Guide

Log Integration procedure:

To forward logs, make the following configuration.

  1. Login to the CLI Terminal

  2. Switch to Global Configuration mode.

Enter the following command:

config t

device# config t

  1. Configure Syslog Forwarding

Enter the following command:

logging X.X.X.X udp 12311

device(config)# logging 10.10.2.73 udp 12311

Replace X.X.X.X with Log Collector IP of specific branch with the Port Number same as above.

  1. Configure Severity level

Enter the following command:

logging severity debug

device(config)# logging severity debug

  1. Exit the Configuration mode.

Type end

device(config)# end

  1. Save the configuration.

Type write memory

device# write memory

PreviousSeqrite 82NextWindows FIM