Cisco ASA using ASDM
Last updated
Last updated
Load the ASDM.
Select Configuration > Device Management > Logging > Logging Setup.
Select Enable Logging.
Select Logging > Logging Filters.
Choose the syslog-servers as Informational.
Select Logging > Syslog servers.
Click Add.
Enter the IP address of Log Collector and choose the appropriate interface. Also, ensure that you choose UDP and enter the port number 514 or 1514. Check Appendix A for default log ports.
Select Logging > Syslog Setup.
Select Include time stamp in syslogs option and scroll down to ensure the syslog IDs 302013, 302014, 302015 & 302016 are in enabled state and the logging level is set to Informational.
You can disable specific syslog IDs based on your requirement.
Note: | By selecting the check mark for the Include timestamp in syslogs option, you can add the date and time that they were generated as a field to the syslogs. |
Select the syslogs to disable and click Edit.
From the Edit Syslog ID Settings window, select the Disable messages option and click OK.
The disabled syslogs can be viewed in a separate tab by selecting Disabled syslog IDs from the Syslog ID Setup drop-down menu.
