Configuring to send Syslog Messages directly from Sensor

Configuring to send Syslog Messages directly from Sensor

  1. Log in to the Juniper Networks IDP device.

  2. Click Device > Report Settings > Enable Syslog in the Juniper Networks IDP device.

  3. Select the Enable Syslog Messages check box.

  4. Click Apply to save the changes.

This configuration will generate syslogs for:

  • All attacks

  • Policy load

  • Restart

This configuration will not provide:

  • Profiler logs

  • Device connect/disconnect logs

  • Interface UP/DOWN logs

  • Logs for Bypass State Changes 

PreviousUsing CLINextSonicwall

Last updated